This is a text-only version of the following page on https://raymii.org: --- Title : Proxmox VE - One Public IP Author : Remy van Elst Date : 10-07-2014 URL : https://raymii.org/s/tutorials/Proxmox_VE_One_Public_IP.html Format : Markdown/HTML --- This guide will show you how to set up Proxmox with only one public IP. We will configure an extra interface bridge and make sure VM traffic is NATed. I have a few dedicated servers, some run Proxmox. Most of them however have only a few IP's. Therefore the VM's in proxmox cannot all have a public IP. For most of them that is not a problem. If needed I run a proxy or set up iptables to forward ports to the VM's.

Recently I removed all Google Ads from this site due to their invasive tracking, as well as Google Analytics. Please, if you found this content useful, consider a small donation using any of the options below:

I'm developing an open source monitoring app called Leaf Node Monitoring, for windows, linux & android. Go check it out!

Consider sponsoring me on Github. It means the world to me if you show your appreciation and you'll help pay the server costs.

You can also sponsor me by getting a Digital Ocean VPS. With this referral link you'll get $200 credit for 60 days. Spend $25 after your credit expires and I'll get $25!

This guide is tested on a proxmox machine running proxmox version 3.2. What we will have at the end is a VM with an SSH port reachable on the public IP: Container/VM ------------ Proxmox Server -------------- Public Internet 10.21.21.5:22 --- 10.21.21.5:22 NAT to 1.2.3.4:2222 --- 1.2.3.4:2222 Proxmox by default creates one interface, `vmbr0`. That config looks like this: # /etc/network/interfaces auto vmbr0 iface vmbr0 inet static address 1.2.3.4 netmask 255.255.255.0 network 1.2.3.0 broadcast 1.2.3.255 gateway 1.2.3.1 bridge_ports eth0 bridge_stp off bridge_fd 0 Replace `1.2.3.X` with your public ip, network, gateway and such. Do note that there might be more interfaces, like `vmbr1` for ipv6. We create a new bridge which will enable NAT when the interface gets UP. Add the following to the file: # /etc/network/interfaces: auto vmbr2 iface vmbr2 inet static address 10.21.21.254 netmask 255.255.255.0 bridge_ports none bridge_stp off bridge_fd 0 post-up echo 1 > /proc/sys/net/ipv4/ip_forward post-up iptables -t nat -A POSTROUTING -s '10.21.21.0/24' -o vmbr0 -j MASQUERADE post-down iptables -t nat -D POSTROUTING -s '10.21.21.0/24' -o vmbr0 -j MASQUERADE post-up iptables -t nat -A PREROUTING -i vmbr0 -p tcp --dport 2222 -j DNAT --to 10.21.21.5:22 post-down iptables -t nat -D PREROUTING -i vmbr0 -p tcp --dport 2222 -j DNAT --to 10.21.21.5:22 The first part: address 10.21.21.254 netmask 255.255.255.0 bridge_ports none bridge_stp off bridge_fd 0 defines the IP address and subnet mask of the new interface. It also tells the network stack that the bridge has no actual ports (like eth0) and that the Spanning Tree Protocol should be disabled. post-up echo 1 > /proc/sys/net/ipv4/ip_forward Enables IP forwarding when this interface gets up. This allows the machine to forward packets. post-up iptables -t nat -A POSTROUTING -s '10.21.21.0/24' -o vmbr0 -j MASQUERADE post-down iptables -t nat -D POSTROUTING -s '10.21.21.0/24' -o vmbr0 -j MASQUERADE These two lines enable the actual NAT-ing of packets from the source network '10.21.21.0/24' and `vmbr0` as the output interface. If your WAN interface has a different name, change that here. The first line enables the natting when the interface gets up, the second line deletes the firewall rule when the interface goes down. post-up iptables -t nat -A PREROUTING -i vmbr0 -p tcp --dport 2222 -j DNAT --to 10.21.21.5:22 post-down iptables -t nat -D PREROUTING -i vmbr0 -p tcp --dport 2222 -j DNAT --to 10.21.21.5:22 These two rules enable and disable the actual port forwarding of tcp port `2222` on the WAN IP to tcp port 22 on internal IP address 10.21.21.5. Here as well the WAN interface (this time, the input interface) is `vmbr0`. If you for example want to expose tcp port 80 of a VM with IP 10.21.21.6 on the public IP's port 80, you should also add these lines: post-up iptables -t nat -A PREROUTING -i vmbr0 -p tcp --dport 80 -j DNAT --to 10.21.21.6:80 post-down iptables -t nat -D PREROUTING -i vmbr0 -p tcp --dport 80 -j DNAT --to 10.21.21.6:80 When you create a KVM VM, make sure it is attached to the bridge `vmbr2`. It should also have a static IP configured in the range you define. OpenVZ `venet` interfaces with an IP in this range automagiaclly work. Don't forget to restart the network afterwards: /etc/init.d/networking restart [1]: https://www.digitalocean.com/?refcode=7435ae6b8212 --- License: All the text on this website is free as in freedom unless stated otherwise. This means you can use it in any way you want, you can copy it, change it the way you like and republish it, as long as you release the (modified) content under the same license to give others the same freedoms you've got and place my name and a link to this site with the article as source. This site uses Google Analytics for statistics and Google Adwords for advertisements. You are tracked and Google knows everything about you. Use an adblocker like ublock-origin if you don't want it. All the code on this website is licensed under the GNU GPL v3 license unless already licensed under a license which does not allows this form of licensing or if another license is stated on that page / in that software: This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . Just to be clear, the information on this website is for meant for educational purposes and you use it at your own risk. I do not take responsibility if you screw something up. Use common sense, do not 'rm -rf /' as root for example. If you have any questions then do not hesitate to contact me. See https://raymii.org/s/static/About.html for details.